The be quiet! Dark Power Pro 12 1500W offers 80 PLUS® Titanium efficiency and world class performance due to fully digital control and frameless fan concept.
Dark Power Pro 12 1500W is certified with 80 PLUS Titanium and an energy efficiency rating of up to 94.9%. This provides lots of benefits for your high-end system, including less power consumption and an overall cooler and quieter operation. The standby drain is below 0.1 watts.
The fully digital control (PFC, LLC, SR/12V) results in higher efficiency, better regulation and lower ripple noise. This guarantees an incomparably stable operation. Due to the digital concept the Dark Power Pro 12 can reach a great efficiency over the complete power range, even at low load.
The be quiet! Silent Wings fan mounted on a tripod enables maximum airflow and a virtually inaudible operation at ordinary loads. This is thanks to its unique, airflow-optimized fan blade design along with an advanced fluid-dynamic bearing and 6-pole fan motor for less vibration, super-long life and minimal power consumption.
The split fan inlet of the Dark Power Pro 12 1500W is a specially-shaped funnel that increases airflow while reducing unwanted turbulence. The wire-free design inside allows the cool air to reach all components flawlessly which ultimately leads to a longer lifespan.
Dark Power Pro 12 1500W is particularly suitable for overclocking, thanks to its strong and stable 12V rails. The overclocking key empowers you with full control for overclocking by manually switching between the default six 12V-rail mode and the alternative massive single-rail operation.
The maximum utility afforded by modular individually sleeved cables of up to 120cm simplifies component installation and reduces annoying clutter. This results in increased airflow and improved cooling in
even the largest PC cases.
Experience the most technologically advanced power supply be quiet! has ever built! Using an advanced digital full bridge, LLC and Synchronous Rectifier (SR) technology it provides unmatched signal stability and unbeatable power efficiency. It is also equipped with DC-to-DC conversion for tight voltage regulation, even under heavy cross-loading conditions. This ensures reliable operation for the next generation of
processors and graphics cards.
Only the best components are used in Dark Power Pro 12 1500W. That is why we have built exclusively high-quality Japanese capacitors into the PSU chassis. They are rated to 105°C which ensures stability, reliability and a long operating life.
The all-new PSU front and the redesigned funnel-shaped air inlet uphold the high air circulation abilities. In combination with the individually sleeved cables, the high-quality aluminum case on the outside and the high-end components on the inside make the Dark Power Pro 12 1500W shine from every possible angle.
Model | Dark Power Pro 12 1500W |
Continuous power (W) | 1500 |
Peak power (W) | 1600 |
Form factor | Version 2.51 |
Form factor EPS 12V | Version 2.92 |
Topology | Full bridge + LLC + SR + DC/DC |
Digitally controlled | ✓ |
Voltage (Vac) | 100 - 240 |
Frequency (Hz) | 50 - 60 |
Input current (A) | 17 / 9 |
Power factor at 100% load | >0.99 |
Modern standby | ✓ |
Power consumption in standby (W) | <0.06 |
Average life time (h / 25°C) | 300,000 |
Operating temperature up to (°C) | 50 |
80 PLUS certification | Titanium |
Efficiency (%) at 230V, 2% load | - |
Efficiency (%) at 230V, 10% load | - |
Efficiency (%) at 230V, 20% load | 94.7 |
Efficiency (%) at 230V, 50% load | 94.9 |
Efficiency (%) at 230V, 100% load | 92.8 |
Fan | Silent Wings |
Fan size (mm) | 135 |
Bearing technology | FDB |
Motor technology | 6-pole fan motor |
Max. fan speed (rpm) | 2600 |
dB(A) at 10% load | - |
dB(A) at 20% load | 12.1 |
dB(A) at 50% load | 12.4 |
dB(A) at 100% load | 31.5 |
Multi-rail operation (12V rails) | 6 |
12V single rail operation | ✓ |
Overclocking key | ✓ |
+3.3V (A) | 25 |
+5V (A) | 25 |
+12V1 (A) | 40 |
+12V2 (A) | 40 |
+12V3 (A) | 40 |
+12V4 (A) | 40 |
+12V5 (A) | 45 |
+12V6 (A) | 45 |
-12V (A) | 0.5 |
+5Vsb (A) | 3.5 |
Max. combined power 12V (W) | 1500 |
Max. combined power 12VHPWR (W) | 0 |
Max. combined power 3.3V + 5V (W) | 150 |
Hold-up time at 100% load (ms) | 18 |
Hold-up time at 80% load (ms) | - |
Power good signal (ms) | 100 - 150 |
Modular cables | ✓ |
Sleeved cables | all |
Flat cables | - |
Maximum cable length (cm) | 120 |
Cable length to motherboard (cm) | 60 |
No. of cables | 17 |
ATX-Motherboard (20+4-pin) | 1 |
P4+4 (CPU) | 1 |
P8 (CPU) | 1 |
P4 (CPU) | - |
12VHPWR cables | 0 |
PCI-e 6+2-pin (GPU) | 10 |
PCI-e 6-pin (GPU) | - |
SATA | 16 |
PATA | 8 |
FDD (Floppy) | 2 |
OTP (over temperature protection) | ✓ |
OCP (over current protection) | ✓ |
OPP (over power protection) | ✓ |
SCP (short circuit protection) | ✓ |
OVP (over Voltage protection) | ✓ |
UVP (under Voltage protection) | ✓ |
SIP (Surge & Inrush protection) | ✓ |
BSMI | ✓ |
CB | ✓ |
CCC | ✓ |
CE | ✓ |
cRUus | - |
cTUVus | ✓ |
CU | ✓ |
FCC | ✓ |
RCM | ✓ |
TÜV | ✓ |
UKCA | - |
Energy Star | 7.0 |
ErP | ✓ |
WEEE | ✓ |
RoHS | ✓ |
Triman | - |
Thumb screws | ✓ |
Screws | ✓ |
Cable ties | ✓ |
Velcro cable ties | ✓ |
User manual languages | CN, DE, EN, ES, FR, JP, PL, RU, TW |
OCK slot bracket with switch / OCK jumper | ✓ |
SFX-to-ATX adapter bracket | - |
Dimensions without cable (L x W x H), (mm) | 200 x 150 x 86 |
Weight (kg) | 2.44 |
Color | Black |
Warranty (Years) | 10 |
Express replacement service in first year | DE, FR |
International hotline / free of charge | ✓ / DE, FR |
Article number | BN647 |
EAN code | 4260052187722 |
Dimensions, package (L x W x H), (mm) | 417 x 253 x 152 |
Gross weight, package (kg) | 6.9 |
Pieces per packaging unit | 2 |
Dimensions, shipping box (L x W x H), (mm) | 440 x 325 x 283 |
Gross weight, shipping box (kg) | 14.6 |
RRP (€) | 449.00 |
You are already using a be quiet! power supply and want to upgrade your system with a new DARK POWER PRO 12 | 1500W ? Check here which cables are compatible and don't need to be replaced.